Futaba SBUS
Posted: Thu Apr 11, 2024 5:26 pm
SBus
Depending on the servo, it could be either HV or not. Look in the description for the HV designation.
SBus servos need to be programmed to a channel assignment. This can be done with a programming device or through the transmitter in the case of the 14 and 18 series transmitters.
An SBus servo is just a servo if used with a non SBus receiver or with an SBus receiver but plugged into a regular channel port.
If using for SBus you will need either hubs or home made leads with as many female connectors as needed to get the job done. I usually make my own hubs to get them custom fit for the purpose.
If using non SBus Futaba servos for SBus you will need the decoder. I don't believe other brands can be used for SBus purposes.
Depending on the servo, it could be either HV or not. Look in the description for the HV designation.
SBus servos need to be programmed to a channel assignment. This can be done with a programming device or through the transmitter in the case of the 14 and 18 series transmitters.
An SBus servo is just a servo if used with a non SBus receiver or with an SBus receiver but plugged into a regular channel port.
If using for SBus you will need either hubs or home made leads with as many female connectors as needed to get the job done. I usually make my own hubs to get them custom fit for the purpose.
If using non SBus Futaba servos for SBus you will need the decoder. I don't believe other brands can be used for SBus purposes.