block dump

Post Reply
zemerdon
Site Admin
Posts: 239
Joined: Mon Jan 23, 2023 8:13 pm

block dump

Post by zemerdon »

dmesg output (before changing HDD from onboard SATA controller to HBA. This is the WDC_WUH721414ALE6L4_QGGJ0DAT device.

Code: Select all

2024-04-06T14:59:59+10:00 NAS kernel: [  620.132585] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T14:59:59+10:00 NAS kernel: [  620.208587] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T14:59:59+10:00 NAS kernel: [  620.208599] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T14:59:59+10:00 NAS kernel: [  620.208644] sd 0:0:4:0: [sdc] tag#1673 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=1s
2024-04-06T14:59:59+10:00 NAS kernel: [  620.208654] sd 0:0:4:0: [sdc] tag#1673 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
2024-04-06T14:59:59+10:00 NAS kernel: [  620.208658] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:00+10:00 NAS kernel: [  620.683666] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:00+10:00 NAS kernel: [  620.683674] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:01+10:00 NAS kernel: [  622.183669] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:01+10:00 NAS kernel: [  622.183681] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:01+10:00 NAS kernel: [  622.183712] sd 0:0:4:0: [sdc] tag#1679 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=1s
2024-04-06T15:00:01+10:00 NAS kernel: [  622.183721] sd 0:0:4:0: [sdc] tag#1679 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:00:01+10:00 NAS kernel: [  622.183726] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:02+10:00 NAS kernel: [  623.382106] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:00:02+10:00 NAS kernel: [  623.433786] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:03+10:00 NAS kernel: [  623.882123] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:00:03+10:00 NAS kernel: [  623.933761] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:04+10:00 NAS kernel: [  624.958739] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:04+10:00 NAS kernel: [  624.958751] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:04+10:00 NAS kernel: [  625.382172] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:00:04+10:00 NAS kernel: [  625.458811] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:04+10:00 NAS kernel: [  625.458823] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:04+10:00 NAS kernel: [  625.458857] sd 0:0:4:0: [sdc] tag#1689 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:00:04+10:00 NAS kernel: [  625.458867] sd 0:0:4:0: [sdc] tag#1689 CDB: Read(16) 88 00 00 00 00 06 5d df ff f0 00 00 00 08 00 00
2024-04-06T15:00:04+10:00 NAS kernel: [  625.458872] I/O error, dev sdc, sector 27344764912 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:05+10:00 NAS kernel: [  626.433831] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:05+10:00 NAS kernel: [  626.433844] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:07+10:00 NAS kernel: [  627.683912] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:07+10:00 NAS kernel: [  627.683928] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:07+10:00 NAS kernel: [  627.683981] sd 0:0:4:0: [sdc] tag#1692 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=7s
2024-04-06T15:00:07+10:00 NAS kernel: [  627.683991] sd 0:0:4:0: [sdc] tag#1692 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
2024-04-06T15:00:07+10:00 NAS kernel: [  627.683996] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:07+10:00 NAS kernel: [  627.684009] Buffer I/O error on dev sdc, logical block 0, async page read
2024-04-06T15:00:08+10:00 NAS kernel: [  628.933926] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:08+10:00 NAS kernel: [  628.933950] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:09+10:00 NAS kernel: [  630.183941] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:09+10:00 NAS kernel: [  630.183953] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:09+10:00 NAS kernel: [  630.382337] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:00:09+10:00 NAS kernel: [  630.483989] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:09+10:00 NAS kernel: [  630.484036] sd 0:0:4:0: [sdc] tag#1701 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:00:09+10:00 NAS kernel: [  630.484050] sd 0:0:4:0: [sdc] tag#1701 CDB: Read(16) 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
2024-04-06T15:00:09+10:00 NAS kernel: [  630.484056] I/O error, dev sdc, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:10+10:00 NAS kernel: [  631.450678] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:12+10:00 NAS kernel: [  632.684125] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:13+10:00 NAS kernel: [  633.934052] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:14+10:00 NAS kernel: [  635.184120] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:15+10:00 NAS kernel: [  636.442506] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:17+10:00 NAS kernel: [  637.709286] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:17+10:00 NAS kernel: [  637.709326] sd 0:0:4:0: [sdc] tag#1719 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=7s
2024-04-06T15:00:17+10:00 NAS kernel: [  637.709338] sd 0:0:4:0: [sdc] tag#1719 CDB: Read(16) 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
2024-04-06T15:00:17+10:00 NAS kernel: [  637.709345] I/O error, dev sdc, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:17+10:00 NAS kernel: [  637.709358] Buffer I/O error on dev sdc, logical block 1, async page read
2024-04-06T15:00:18+10:00 NAS kernel: [  638.684277] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:18+10:00 NAS kernel: [  638.684328] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:18+10:00 NAS kernel: [  639.592653] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:18+10:00 NAS kernel: [  639.592690] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:18+10:00 NAS kernel: [  639.592719] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:20+10:00 NAS kernel: [  640.684351] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:20+10:00 NAS kernel: [  640.684368] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:21+10:00 NAS kernel: [  641.934331] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:22+10:00 NAS kernel: [  643.184377] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:23+10:00 NAS kernel: [  644.434496] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:23+10:00 NAS kernel: [  644.434518] sd 0:0:4:0: [sdc] tag#1684 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=6s
2024-04-06T15:00:23+10:00 NAS kernel: [  644.434524] sd 0:0:4:0: [sdc] tag#1684 CDB: Read(16) 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
2024-04-06T15:00:23+10:00 NAS kernel: [  644.434527] I/O error, dev sdc, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:23+10:00 NAS kernel: [  644.434534] Buffer I/O error on dev sdc, logical block 1, async page read
2024-04-06T15:00:25+10:00 NAS kernel: [  645.684517] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:25+10:00 NAS kernel: [  645.684519] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:25+10:00 NAS kernel: [  645.684547] sd 0:0:4:0: [sdc] tag#1686 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=1s
2024-04-06T15:00:25+10:00 NAS kernel: [  645.684555] sd 0:0:4:0: [sdc] tag#1686 CDB: Read(16) 88 00 00 00 00 06 5d df ff f8 00 00 00 08 00 00
2024-04-06T15:00:25+10:00 NAS kernel: [  645.684559] I/O error, dev sdc, sector 27344764920 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:26+10:00 NAS kernel: [  647.382895] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:00:26+10:00 NAS kernel: [  647.434553] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:27+10:00 NAS kernel: [  648.184551] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:27+10:00 NAS kernel: [  648.184560] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:28+10:00 NAS kernel: [  649.434663] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:28+10:00 NAS kernel: [  649.434676] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:30+10:00 NAS kernel: [  650.684731] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:30+10:00 NAS kernel: [  650.684742] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:31+10:00 NAS kernel: [  651.934666] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:31+10:00 NAS kernel: [  651.934683] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184680] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184696] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184732] sd 0:0:4:0: [sdc] tag#1700 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=7s
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184745] sd 0:0:4:0: [sdc] tag#1700 CDB: Read(16) 88 00 00 00 00 06 5d df ff f8 00 00 00 08 00 00
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184751] I/O error, dev sdc, sector 27344764920 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184766] Buffer I/O error on dev sdc, logical block 3418095615, async page read
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184797] sd 0:0:4:0: [sdc] tag#1697 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=8s
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184806] sd 0:0:4:0: [sdc] tag#1697 CDB: Read(16) 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184811] I/O error, dev sdc, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:32+10:00 NAS kernel: [  653.184822] Buffer I/O error on dev sdc, logical block 1, async page read
2024-04-06T15:00:33+10:00 NAS kernel: [  654.434780] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:35+10:00 NAS kernel: [  655.693233] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:36+10:00 NAS kernel: [  656.976558] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:36+10:00 NAS kernel: [  656.976589] sd 0:0:4:0: [sdc] tag#1706 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=1s
2024-04-06T15:00:36+10:00 NAS kernel: [  656.976598] sd 0:0:4:0: [sdc] tag#1706 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:00:36+10:00 NAS kernel: [  656.976603] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:37+10:00 NAS kernel: [  658.184845] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:38+10:00 NAS kernel: [  659.434951] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:40+10:00 NAS kernel: [  660.685077] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:41+10:00 NAS kernel: [  661.935007] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:42+10:00 NAS kernel: [  663.193400] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:43+10:00 NAS kernel: [  664.435127] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:43+10:00 NAS kernel: [  664.435155] sd 0:0:4:0: [sdc] tag#1712 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=7s
2024-04-06T15:00:43+10:00 NAS kernel: [  664.435164] sd 0:0:4:0: [sdc] tag#1712 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:00:43+10:00 NAS kernel: [  664.435168] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:43+10:00 NAS kernel: [  664.435180] Buffer I/O error on dev sdc, logical block 3418095600, async page read
2024-04-06T15:00:44+10:00 NAS kernel: [  665.435168] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:44+10:00 NAS kernel: [  665.435206] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:44+10:00 NAS kernel: [  665.435242] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
2024-04-06T15:00:45+10:00 NAS kernel: [  666.451879] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:45+10:00 NAS kernel: [  666.451913] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:47+10:00 NAS kernel: [  667.685317] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:47+10:00 NAS kernel: [  667.685329] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:47+10:00 NAS kernel: [  667.685357] sd 0:0:4:0: [sdc] tag#1718 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=1s
2024-04-06T15:00:47+10:00 NAS kernel: [  667.685366] sd 0:0:4:0: [sdc] tag#1718 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:00:47+10:00 NAS kernel: [  667.685371] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:00:48+10:00 NAS kernel: [  668.935246] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:48+10:00 NAS kernel: [  668.935263] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:49+10:00 NAS kernel: [  670.185260] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:49+10:00 NAS kernel: [  670.185272] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:49+10:00 NAS kernel: [  670.633672] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:00:50+10:00 NAS kernel: [  670.647288] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
2024-04-06T15:00:50+10:00 NAS kernel: [  670.702035] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:50+10:00 NAS kernel: [  670.702087] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:00:51+10:00 NAS kernel: [  671.685483] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:51+10:00 NAS kernel: [  671.685496] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:52+10:00 NAS kernel: [  672.935434] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:52+10:00 NAS kernel: [  672.935446] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:53+10:00 NAS kernel: [  674.185436] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:53+10:00 NAS kernel: [  674.185447] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:53+10:00 NAS kernel: [  674.185474] sd 0:0:4:0: [sdc] tag#1701 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=6s
2024-04-06T15:00:53+10:00 NAS kernel: [  674.185483] sd 0:0:4:0: [sdc] tag#1701 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:00:53+10:00 NAS kernel: [  674.185487] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:00:53+10:00 NAS kernel: [  674.185498] Buffer I/O error on dev sdc, logical block 3418095600, async page read
2024-04-06T15:00:54+10:00 NAS kernel: [  675.435501] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:54+10:00 NAS kernel: [  675.435515] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:56+10:00 NAS kernel: [  676.693945] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:56+10:00 NAS kernel: [  676.693957] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:56+10:00 NAS kernel: [  676.694118] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
2024-04-06T15:00:57+10:00 NAS kernel: [  677.935594] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:57+10:00 NAS kernel: [  677.935604] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:58+10:00 NAS kernel: [  679.193937] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:58+10:00 NAS kernel: [  679.193944] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:59+10:00 NAS kernel: [  680.435672] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:00:59+10:00 NAS kernel: [  680.435680] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:00+10:00 NAS kernel: [  681.634027] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:01+10:00 NAS kernel: [  681.760740] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:01+10:00 NAS kernel: [  681.760767] sd 0:0:4:0: [sdc] tag#1727 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:01+10:00 NAS kernel: [  681.760773] sd 0:0:4:0: [sdc] tag#1727 CDB: Read(16) 88 00 00 00 00 06 5d df ff f8 00 00 00 08 00 00
2024-04-06T15:01:01+10:00 NAS kernel: [  681.760776] I/O error, dev sdc, sector 27344764920 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:01+10:00 NAS kernel: [  682.444081] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:03+10:00 NAS kernel: [  683.694185] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:04+10:00 NAS kernel: [  684.935859] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:05+10:00 NAS kernel: [  686.134754] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:05+10:00 NAS kernel: [  686.202523] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:06+10:00 NAS kernel: [  686.935854] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:07+10:00 NAS kernel: [  687.884294] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:07+10:00 NAS kernel: [  687.952598] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:07+10:00 NAS kernel: [  687.952629] sd 0:0:4:0: [sdc] tag#1671 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=6s
2024-04-06T15:01:07+10:00 NAS kernel: [  687.952638] sd 0:0:4:0: [sdc] tag#1671 CDB: Read(16) 88 00 00 00 00 06 5d df ff f8 00 00 00 08 00 00
2024-04-06T15:01:07+10:00 NAS kernel: [  687.952643] I/O error, dev sdc, sector 27344764920 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:01:07+10:00 NAS kernel: [  687.952655] Buffer I/O error on dev sdc, logical block 3418095615, async page read
2024-04-06T15:01:08+10:00 NAS kernel: [  688.694358] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:08+10:00 NAS kernel: [  688.886074] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:08+10:00 NAS kernel: [  688.952621] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:08+10:00 NAS kernel: [  688.952646] sd 0:0:4:0: [sdc] tag#1678 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:08+10:00 NAS kernel: [  688.952652] sd 0:0:4:0: [sdc] tag#1678 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:01:08+10:00 NAS kernel: [  688.952655] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:09+10:00 NAS kernel: [  689.935959] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:10+10:00 NAS kernel: [  691.186034] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:11+10:00 NAS kernel: [  692.444407] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:13+10:00 NAS kernel: [  693.702818] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:13+10:00 NAS kernel: [  693.884433] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:13+10:00 NAS kernel: [  693.952798] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:14+10:00 NAS kernel: [  694.936129] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:14+10:00 NAS kernel: [  694.936162] sd 0:0:4:0: [sdc] tag#1685 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=5s
2024-04-06T15:01:14+10:00 NAS kernel: [  694.936170] sd 0:0:4:0: [sdc] tag#1685 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:01:14+10:00 NAS kernel: [  694.936174] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:01:14+10:00 NAS kernel: [  694.936185] Buffer I/O error on dev sdc, logical block 3418095600, async page read
2024-04-06T15:01:15+10:00 NAS kernel: [  696.137476] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:15+10:00 NAS kernel: [  696.211147] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:15+10:00 NAS kernel: [  696.211173] sd 0:0:4:0: [sdc] tag#1686 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:15+10:00 NAS kernel: [  696.211180] sd 0:0:4:0: [sdc] tag#1686 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:01:15+10:00 NAS kernel: [  696.211183] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:16+10:00 NAS kernel: [  696.936197] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:17+10:00 NAS kernel: [  698.186266] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:18+10:00 NAS kernel: [  699.444655] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:20+10:00 NAS kernel: [  700.694722] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:20+10:00 NAS kernel: [  701.634690] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:21+10:00 NAS kernel: [  701.736468] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:21+10:00 NAS kernel: [  701.736488] sd 0:0:4:0: [sdc] tag#1719 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:21+10:00 NAS kernel: [  701.736493] sd 0:0:4:0: [sdc] tag#1719 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
2024-04-06T15:01:21+10:00 NAS kernel: [  701.736496] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:21+10:00 NAS kernel: [  702.444759] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:23+10:00 NAS kernel: [  703.686487] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:24+10:00 NAS kernel: [  704.936469] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:25+10:00 NAS kernel: [  706.186471] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:26+10:00 NAS kernel: [  707.436596] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:28+10:00 NAS kernel: [  708.686667] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:28+10:00 NAS kernel: [  708.686698] sd 0:0:4:0: [sdc] tag#1668 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=6s
2024-04-06T15:01:28+10:00 NAS kernel: [  708.686709] sd 0:0:4:0: [sdc] tag#1668 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
2024-04-06T15:01:28+10:00 NAS kernel: [  708.686713] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024-04-06T15:01:28+10:00 NAS kernel: [  708.686727] Buffer I/O error on dev sdc, logical block 0, async page read
2024-04-06T15:01:29+10:00 NAS kernel: [  709.953299] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:30+10:00 NAS kernel: [  711.286719] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:30+10:00 NAS kernel: [  711.635012] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:31+10:00 NAS kernel: [  711.703478] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:31+10:00 NAS kernel: [  711.703499] sd 0:0:4:0: [sdc] tag#1673 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:31+10:00 NAS kernel: [  711.703507] sd 0:0:4:0: [sdc] tag#1673 CDB: Read(16) 88 00 00 00 00 06 5d df ff 80 00 00 00 08 00 00
2024-04-06T15:01:31+10:00 NAS kernel: [  711.703510] I/O error, dev sdc, sector 27344764800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:31+10:00 NAS kernel: [  712.635095] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:32+10:00 NAS kernel: [  712.703467] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:32+10:00 NAS kernel: [  712.885132] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:32+10:00 NAS kernel: [  713.003439] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:32+10:00 NAS kernel: [  713.003470] sd 0:0:4:0: [sdc] tag#1680 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:32+10:00 NAS kernel: [  713.003479] sd 0:0:4:0: [sdc] tag#1680 CDB: Read(16) 88 00 00 00 00 00 00 00 00 08 00 00 00 08 00 00
2024-04-06T15:01:32+10:00 NAS kernel: [  713.003484] I/O error, dev sdc, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:33+10:00 NAS kernel: [  714.135635] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:33+10:00 NAS kernel: [  714.220096] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:33+10:00 NAS kernel: [  714.220130] sd 0:0:4:0: [sdc] tag#1683 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:33+10:00 NAS kernel: [  714.220141] sd 0:0:4:0: [sdc] tag#1683 CDB: Read(16) 88 00 00 00 00 06 5d df ff f8 00 00 00 08 00 00
2024-04-06T15:01:33+10:00 NAS kernel: [  714.220147] I/O error, dev sdc, sector 27344764920 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:35+10:00 NAS kernel: [  715.695268] mpt2sas_cm0: log_info(0x31111000): originator(PL), code(0x11), sub_code(0x1000)
2024-04-06T15:01:35+10:00 NAS kernel: [  716.635179] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:36+10:00 NAS kernel: [  716.703641] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:36+10:00 NAS kernel: [  717.135794] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:36+10:00 NAS kernel: [  717.228603] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:36+10:00 NAS kernel: [  717.228641] sd 0:0:4:0: [sdc] tag#1690 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:36+10:00 NAS kernel: [  717.228650] sd 0:0:4:0: [sdc] tag#1690 CDB: Read(16) 88 00 00 00 00 06 5d df ff c0 00 00 00 08 00 00
2024-04-06T15:01:36+10:00 NAS kernel: [  717.228654] I/O error, dev sdc, sector 27344764864 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:37+10:00 NAS kernel: [  718.135814] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:37+10:00 NAS kernel: [  718.245240] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:37+10:00 NAS kernel: [  718.245262] sd 0:0:4:0: [sdc] tag#1696 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:37+10:00 NAS kernel: [  718.245270] sd 0:0:4:0: [sdc] tag#1696 CDB: Read(16) 88 00 00 00 00 06 5d df fd 58 00 00 00 08 00 00
2024-04-06T15:01:37+10:00 NAS kernel: [  718.245273] I/O error, dev sdc, sector 27344764248 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:37+10:00 NAS kernel: [  718.635293] sd 0:0:4:0: Power-on or device reset occurred
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795377] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795389] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795394] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795398] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795402] mpt2sas_cm0: log_info(0x31120311): originator(PL), code(0x12), sub_code(0x0311)
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795427] sd 0:0:4:0: [sdc] tag#1721 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795439] sd 0:0:4:0: [sdc] tag#1721 CDB: Read(16) 88 00 00 00 00 00 00 00 01 08 00 00 00 08 00 00
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795444] I/O error, dev sdc, sector 264 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795471] sd 0:0:4:0: [sdc] tag#1720 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795480] sd 0:0:4:0: [sdc] tag#1720 CDB: Read(16) 88 00 00 00 00 00 00 00 00 88 00 00 00 78 00 00
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795484] I/O error, dev sdc, sector 136 op 0x0:(READ) flags 0x80700 phys_seg 15 prio class 2
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795504] sd 0:0:4:0: [sdc] Unaligned partial completion (resid=3068, sector_sz=512)
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795511] sd 0:0:4:0: [sdc] tag#1718 CDB: Read(16) 88 00 00 00 00 00 00 00 00 28 00 00 00 10 00 00
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795519] sd 0:0:4:0: [sdc] tag#1718 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795525] sd 0:0:4:0: [sdc] tag#1718 CDB: Read(16) 88 00 00 00 00 00 00 00 00 28 00 00 00 10 00 00
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795530] I/O error, dev sdc, sector 40 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795546] sd 0:0:4:0: [sdc] tag#1717 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795553] sd 0:0:4:0: [sdc] tag#1717 CDB: Read(16) 88 00 00 00 00 00 00 00 00 10 00 00 00 08 00 00
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795559] I/O error, dev sdc, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795587] sd 0:0:4:0: [sdc] tag#1719 FAILED Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK cmd_age=0s
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795595] sd 0:0:4:0: [sdc] tag#1719 CDB: Read(16) 88 00 00 00 00 00 00 00 00 48 00 00 00 30 00 00
2024-04-06T15:01:38+10:00 NAS kernel: [  718.795600] I/O error, dev sdc, sector 72 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 2
2024-04-06T15:01:38+10:00 NAS kernel: [  719.385318] sd 0:0:4:0: Power-on or device reset occurred
ZFS output

when i catch it..

misc info

The HDD in question is actually on /dev/sde here. Previous (HDD on the onboard SATA controller) logs are before changing the HDD to the HBA. If/when the error occurs ill catch it, i just didn't have the logs when it failed after changing to the HBA (LSI 9207-8I).

Code: Select all

zemerdon@NAS:~$ ./block_devices.sh 
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKSYWVB -> ../../sda
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKSYWVB-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKSYWVB-part9 -> ../../sda9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT3BPB -> ../../sdg
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT3BPB-part1 -> ../../sdg1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT3BPB-part9 -> ../../sdg9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT3USB -> ../../sdf
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT3USB-part1 -> ../../sdf1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT3USB-part9 -> ../../sdf9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT8B9B -> ../../sdi
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT8B9B-part1 -> ../../sdi1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WD120EFBX-68B0EN0_5QKT8B9B-part9 -> ../../sdi9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_81G1YDBV -> ../../sdj
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_81G1YDBV-part1 -> ../../sdj1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_81G1YDBV-part9 -> ../../sdj9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_9MG6WHWA -> ../../sdc
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_9MG6WHWA-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_9MG6WHWA-part9 -> ../../sdc9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_9MH183EJ -> ../../sdk
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_9MH183EJ-part1 -> ../../sdk1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_9MH183EJ-part9 -> ../../sdk9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_QGGJ0DAT -> ../../sde
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_QGGJ0DAT-part1 -> ../../sde1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_QGGJ0DAT-part9 -> ../../sde9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y5HK756C -> ../../sdh
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y5HK756C-part1 -> ../../sdh1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y5HK756C-part9 -> ../../sdh9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y5KTHK8C -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y5KTHK8C-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y5KTHK8C-part9 -> ../../sdb9
lrwxrwxrwx 1 root root  9 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y6GT6PWD -> ../../sdd
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y6GT6PWD-part1 -> ../../sdd1
lrwxrwxrwx 1 root root 10 Apr  6 16:01 ata-WDC_WUH721414ALE6L4_Y6GT6PWD-part9 -> ../../sdd9
S.M.A.R.T output (after changing HDD from onboard SATA controller to HBA)

Code: Select all

root@NAS:/home/zemerdon# sudo smartctl -a /dev/sde1
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.1.0-0.deb11.17-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar DC HC530
Device Model:     WDC  WUH721414ALE6L4
Serial Number:    QGGJ0DAT
LU WWN Device Id: 5 000cca 29bc7476e
Add. Product Id:  202319
Firmware Version: LDGAW2Q0
User Capacity:    14,000,519,643,136 bytes [14.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Apr  6 16:25:32 2024 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  101) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (1432) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   001    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       92
  3 Spin_Up_Time            0x0007   081   081   001    Pre-fail  Always       -       380 (Average 381)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       27
  5 Reallocated_Sector_Ct   0x0033   100   100   001    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   001    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   128   128   020    Pre-fail  Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       931
 10 Spin_Retry_Count        0x0013   100   100   001    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       27
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       3
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       65
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       65
194 Temperature_Celsius     0x0002   062   062   000    Old_age   Always       -       33 (Min/Max 25/52)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   100   100   000    Old_age   Always       -       3
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       9222203374
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       69867779533

SMART Error Log Version: 1
ATA Error Count: 3
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 930 hours (38 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 10 08 28 00 00 40 00      00:13:14.915  READ FPDMA QUEUED
  60 08 00 10 00 00 40 00      00:13:14.913  READ FPDMA QUEUED
  60 08 00 78 00 00 40 00      00:13:14.913  READ FPDMA QUEUED
  60 08 00 38 00 00 40 00      00:13:14.913  READ FPDMA QUEUED
  60 08 00 18 00 00 40 00      00:13:14.911  READ FPDMA QUEUED

Error 2 occurred at disk power-on lifetime: 904 hours (37 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 43 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 10 d0 ce 73 40 08   1d+17:09:53.802  WRITE FPDMA QUEUED
  61 48 18 f0 ce 73 40 08   1d+17:09:53.801  WRITE FPDMA QUEUED
  61 18 68 70 3b dd 40 08   1d+17:09:53.800  WRITE FPDMA QUEUED
  61 18 50 18 60 26 40 08   1d+17:09:53.799  WRITE FPDMA QUEUED
  61 38 48 00 0f df 40 08   1d+17:09:53.799  WRITE FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 863 hours (35 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 43 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 b8 20 63 dd 40 08      00:24:17.142  WRITE FPDMA QUEUED
  61 00 30 20 5d dd 40 08      00:24:17.142  WRITE FPDMA QUEUED
  60 18 a0 c0 eb 40 40 08      00:24:17.140  READ FPDMA QUEUED
  61 00 28 20 5f dd 40 08      00:24:17.139  WRITE FPDMA QUEUED
  61 00 b0 20 61 dd 40 08      00:24:17.139  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       884         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Post Reply